產品詳情
簡單介紹：
三箱式冷熱沖擊試驗箱分為高溫區、測試區、低溫區三部分，待測產品放置于測試區中，沖擊時高溫區或低溫區溫度按照編輯程序自動進入測試區進行沖擊測試產品有五金端子、塑料、橡膠、電子，電池，手機，等材料，在瞬間下經極高溫及極低溫的連續環境下忍受的程度，短時間內檢測試樣因熱脹冷縮所引起的化學變化或物理傷害環境條件下貯存和使用的適應性
Three box type cold heat shock test chamber is divided into three parts, test area, high low temperature area, products placed under test in the test area, shock at high temperature or low temperature zone temperature according to the
詳情介紹：
試驗箱測試標準
Test chamber test standard
GB/T 2423.22-2012 第2部分：試驗方法 試驗N：溫度變化 ；
IEC 60068-2-14-2009 環境試驗 第2-14部分試驗 試驗N溫度變化；
GJB 150.5A-2009 溫度沖擊試驗；
GJB 360B-2009 電子及電氣元件試驗方法。
Part 2: test methods. Test N: change in temperature.
IEC 60068-2-14-2009 environmental tests -- part 2-14 tests N temperature variation;
GJB 150.5a-2009 temperature impact test;
GJB 360b-2009 test method for electronic and electrical components.
試驗箱性能確認符合標準
The test chamber performance is confirmed to meet the standard
GB/T2424.5-2006電工電子產品環境試驗 溫度試驗箱性能確認；
GB/T5170.2-2008電子電工產品環境試驗設備檢驗方法+溫度試驗設備；
JJF1101-2003環境試驗設備溫度、濕度校準規范
Confirm the performance of environmental test temperature test chamber for electrical and electronic products;
Test method of environmental test equipment for electronic and electrical products + temperature test equipment;
Jjf1101-2003 calibration specification for temperature and humidity of environmental test equipment
Test chamber test standard
GB/T 2423.22-2012 第2部分：試驗方法 試驗N：溫度變化 ；
IEC 60068-2-14-2009 環境試驗 第2-14部分試驗 試驗N溫度變化；
GJB 150.5A-2009 溫度沖擊試驗；
GJB 360B-2009 電子及電氣元件試驗方法。
Part 2: test methods. Test N: change in temperature.
IEC 60068-2-14-2009 environmental tests -- part 2-14 tests N temperature variation;
GJB 150.5a-2009 temperature impact test;
GJB 360b-2009 test method for electronic and electrical components.
試驗箱性能確認符合標準
The test chamber performance is confirmed to meet the standard
GB/T2424.5-2006電工電子產品環境試驗 溫度試驗箱性能確認；
GB/T5170.2-2008電子電工產品環境試驗設備檢驗方法+溫度試驗設備；
JJF1101-2003環境試驗設備溫度、濕度校準規范
Confirm the performance of environmental test temperature test chamber for electrical and electronic products;
Test method of environmental test equipment for electronic and electrical products + temperature test equipment;
Jjf1101-2003 calibration specification for temperature and humidity of environmental test equipment
